Re: Question on VLAN for Voice and Data for the same port.
Well the switchport trunk exncapsulation dot1q can be removed of the phone is a Cisco phone, you would require it if there is a Avaya or any other phone.
Switchport mode dynamic desirable should actually go away when you configure switch mode access, since you have access vlan configured.
Ideally speaking this command is also not required:"switchport trunk native vlan 205": In 802.1Q trunking, all VLAN packets are tagged on the trunk link, except the native VLAN. The native VLAN packets are sent untagged on the trunk link. Therefore, the native VLAN should be the same on both switches configured for trunking. This way, you can deduce to which VLAN a frame belongs when you receive a frame with no tag. By default, VLAN 1 is the native VLAN on all switches.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...