Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Question re. Layer 2 Netflow command on 6509

Hi Folks,

I've inherited some 6509s and included in the config is the command;

ip flow ingress layer2-switched vlan 10,20

I'm not interested in capturing layer two netflow statistics, so was going to remove the command, my question is, is this command doing anything other than capturing layer two Netflow statistics? And therefore safe to remove without affecting performance?

Many thanks in advance,

S.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

Re: Question re. Layer 2 Netflow command on 6509

Yes, u can safely remove this command and it does not have any impact other than l2 netflow monitoring capability.

HTH
Rasika
**** pls rate all useful responses ****

Sent from Cisco Technical Support iPad App

1 REPLY
VIP Purple

Re: Question re. Layer 2 Netflow command on 6509

Yes, u can safely remove this command and it does not have any impact other than l2 netflow monitoring capability.

HTH
Rasika
**** pls rate all useful responses ****

Sent from Cisco Technical Support iPad App

141
Views
0
Helpful
1
Replies