Assuming this configuration is on a switch, Dot1x is disabled by default on each interface (dot1x port-control force-authorized) so enabling dot1x globally without setting "dot1x port-control auto" effectively does nothing. Maybe someone configured it for a proof of concept on a couple of ports but never went forward with a deployment. It can be a royal pain to support.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...