07-04-2014 01:53 AM - edited 03-07-2019 07:55 PM
Hi,
I am encoutering an issue on some Catalysts 3750/3560/2960 on IOS 12.2(55). Users logged on privilege 7 can't use the "show logging" command anymore. The command vas available on previous IOS like 12.2(50).
I fixed it with the command "privilege exec level 7 show logging" but I wanted to know if it was intentional or not, as I couldn't find anything about a change on the privilege 7 rights int any of the Cisco's release notes between 12.2(50) and 12.2(55).
Do anyone know about that ?
Solved! Go to Solution.
07-08-2014 09:55 AM
This was implemented as a security feature. Take a look at:
https://supportforums.cisco.com/discussion/10624981/change-privilege-level-command-show-logging
Thank you for rating helpful posts!
07-08-2014 09:55 AM
This was implemented as a security feature. Take a look at:
https://supportforums.cisco.com/discussion/10624981/change-privilege-level-command-show-logging
Thank you for rating helpful posts!
07-10-2014 04:16 AM
Hi Neno,
Thank you for your answer.
I find it wierd that an information like that is not viewable by the public and I don't see why they have done such changes.
Anyway, thanks again. Your link is very helpful, as I now have proof and will be able to communicate on this internally.
Regards,
Julian
07-10-2014 12:11 PM
Hi Julian-
From what I can see it was a security enhancement. It was done to prevent unauthorized users from gaining sensitive information from the device.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: