Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

"Sup720 Causes 6513 to Shut Down"

Hi

We are trying to setup a 6513 with a Sup720. After 8 Minutes, the Chassis Shuts Down - The Red LED on both PSU indicating "Output Failure" lids up.

Chassis runs fine With Sup 2.

What could be the cause, How to Fix?

Thanx

  • LAN Switching and Routing
3 REPLIES
Bronze

Re: "Sup720 Causes 6513 to Shut Down"

Did you upgrade the Power and fan trays when you upgraded to a Sup720?

Blue

Re: "Sup720 Causes 6513 to Shut Down"

Willie,

The Sup 720 requires the high output fan tray. It will shutdown as you describe without it.

Please rate helpful posts.

Dave

New Member

Re: "Sup720 Causes 6513 to Shut Down"

Look for messages dring the boot sequence relating to a the requirement for a high speed fan tray.

105
Views
0
Helpful
3
Replies