11-10-2011 10:11 PM - edited 03-07-2019 03:19 AM
Hello colegaues,
We faced with problem after upgrade ASR from 12(2) 33 XNE2.
I know that this is an old XE release but our Radius deny authization from ASR with more new XE version.
Here is our radius attribute configuretion:
!
radius-server attribute 44 include-in-access-req
radius-server attribute nas-port format d
radius-server host x.x.x.x auth-port 1812 acct-port 1813 non-standard
radius-server key 7 <removed>
radius-server vsa send accounting
radius-server vsa send authentication
!
And this is correct authorization on Radius with NAS-Port-Type = VPDN:
Thread 4 handling request 36, (4 handled so far) at Tue Nov 8 05:11:36 2011
Framed-Protocol = PPP
User-Name = "29567"
CHAP-Password = 01:d0:63:d9:7f:01:bd:2c:73:67:b8:5b:0b:53:78:7b:3b
Connect-Info = "57600"
NAS-Port-Type = VPDN
NAS-Port-Id = 6177
Attr-87 = "Uniq-Sess-ID6177"
Service-Type = Framed-User
NAS-IP-Address = 83.167.66.16
Acct-Session-Id = "0093A035"
modcall: entering group authorize
This is wrong authorization with NAS-Port-Type = Sync:
Thread 132 handling request 233017, (8312 handled so far) at Wed Nov 9 06:34:34 2011
Framed-Protocol = PPP
User-Name = "denisvpn"
CHAP-Password = 01:7c:6a:e2:dc:28:37:8b:ec:8a:df:15:2d:1d:60:d7:87
Connect-Info = "54000000"
NAS-Port-Type = Sync
NAS-Port-Id = 12734
Attr-87 = "Uniq-Sess-ID2734"
Service-Type = Framed-User
NAS-IP-Address = 83.167.66.16
Acct-Session-Id = "00010687"
modcall: entering group authorize
modcall[authorize]: module "voip" returns reject
How can I add in my configuration that ASR send necesserry NAS-Port-Type - VPDN
I couldn't found out any info ((( for radius-server attribute 61 extended
Wbr,
Konstantin.
11-14-2011 01:15 AM
Can we change radius attribute to send
NAS-Port-Type - VPDN from ASR?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide