I have Cisco 2960 switches deployed in my environment along with radius server authentication. Now i need to assign some roles to particular users (shutdown port, description) so what i need to do for this task so not all users have same privileges.
I guess it should be defined in the radius server which you use for different set of users. Which radius server you are using... is it a cisco ACS or some third party. For every user there is a setting to define the privelege level. You can fine tune tune there for the groups you have.
If it is cisco ACS. Then you can have two different groups created based on the privileage levels and get them restricted. If it is a third party then you have to check with that particular platform setting.
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...