Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

rate limit in catalyst 3560

Is there a way to rate limit traffic BW in cisco switch 3560 port, as long as there is no rate limit command supported under the port configuration

1 ACCEPTED SOLUTION

Accepted Solutions

Re: rate limit in catalyst 3560

Hi Kamar

AFAIK you can do the same using policy maps with policing command binded to the different class maps defining your traffic patterns.

do refer this link for more..

http://www.cisco.com/en/US/products/hw/switches/ps5528/products_command_reference_chapter09186a00805b56cd.html#wp1864211

regds

2 REPLIES

Re: rate limit in catalyst 3560

Hi Kamar

AFAIK you can do the same using policy maps with policing command binded to the different class maps defining your traffic patterns.

do refer this link for more..

http://www.cisco.com/en/US/products/hw/switches/ps5528/products_command_reference_chapter09186a00805b56cd.html#wp1864211

regds

New Member

Re: rate limit in catalyst 3560

Thanks spremkumar for your kind support

257
Views
0
Helpful
2
Replies