Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

rate limiting VLAN interface Cisco 6500 native IOS/sup2

I'm looking to learn a bit more about rate limiting a VLAN interface on a Cisco 6509 running native IOS/sup2.

Sadly, I'm coming up with no documentation on the subject and I'm wondering if anyone has had any experience doing this.

2 REPLIES
Cisco Employee

Re: rate limiting VLAN interface Cisco 6500 native IOS/sup2

You cannot do rate-limiting like on routers on ethernet/VLAN interfaces. You need to use PFC QoS(aka Policing)

http://www.cisco.com/warp/public/473/102.html

Note that you can only do ingress policing with Sup2/MSFC2

Community Member

Re: rate limiting VLAN interface Cisco 6500 native IOS/sup2

Thank you!

Could you possibly provide me with a config sample to say, rate limit all ingress trafic on a specific VLAN interface to 300Mb to compare with what I come up with?

1142
Views
0
Helpful
2
Replies
CreatePlease to create content