Rate Shaping/Traffic Shaping 3750x Switch Internet Access Circuits
Hello, I have 3750x running c3750e-universalk9-mz.122-55.SE5 layer 3 capable. I have two internet access circuits on the switch both 100Mbps however there subrated down to 14Mbps by the ISP. Id like to rate shape out bound traffic toward the ISP so we dont drop traffic that exceeds the 14Mbps rate.
It appears this can be done at the layer 3 SVI or at the Layer 2 switch port level. Not sure which is the best way? Please could anyone show me the commands for acheiving the rate shaping?
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...