Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Re: 6500 MSFC3/PFC3 and service-policy output command ...

Hi,

I have a 6500 box with MSFC3/PFC3 and have upgraded the IOS version to s72033-advipservicesk9_wan-mz.122-18.SXF11.bin. It was running IOS verison before this : s72033-pk9sv-mz.122-17d.SXB11.bin

It does note seem to accept the service-policy output command after the upgrade.

routerA(config)#int gi2/47

routerA(config-if)#service-policy output A-Voice

bandwidth percent command is not supported in output direction for this interface

Configuration failed on: GigabitEthernet2/47

routerA(config-if)#service-policy output A-Voice-100M

bandwidth command is not supported in output direction for this interface

Configuration failed on: GigabitEthernet2/47

Is MQC with the bandwidth or bandwidth percent command not supported on the 6500 series box ?

Pls advice,

Cheers,

- InternetB -

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: Re: 6500 MSFC3/PFC3 and service-policy output command ...

Is MQC with the bandwidth or bandwidth percent command not supported on the 6500 series box ?

It's not supported when using regular line cards along with the PFC QoS.

If you purchase a SIP/SPA module, then you can use your regular MQC commands.

Please refer to the documentation:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/qos.html#wp1465326

HTH,

__

Edison.

1 REPLY
Hall of Fame Super Bronze

Re: Re: 6500 MSFC3/PFC3 and service-policy output command ...

Is MQC with the bandwidth or bandwidth percent command not supported on the 6500 series box ?

It's not supported when using regular line cards along with the PFC QoS.

If you purchase a SIP/SPA module, then you can use your regular MQC commands.

Please refer to the documentation:

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SXF/native/configuration/guide/qos.html#wp1465326

HTH,

__

Edison.

732
Views
0
Helpful
1
Replies
CreatePlease to create content