Have a quick quesiton for you, I have a switch that I would like to change the IP address on, when I changed it even though I can ping it from other routers on tne network I cannot log into it and I see that my tac server cannot get to it as well. I went from vlan90 to the new one vlan192. Vlan 192 isn't working am I missing something?
Grant wow that worked!!!! well actually I was going to do it but never got around to do it then all of a sudden I was able to log in so I guess the old crypto keys timed out or something? By the way how do you clear the crypto key...is it just a simple clear crypto key?
Just an update on this, it wasn't the crypto key. I moved another switch to the same subnet as the first one and had the same issue. I cleared the crypto key but still wasn't able to log in. I went to my tac server and wasn't able to ping the switch on the new IP address. So I cleared the arp cache on the switch and then I was able to log in. I went back to my tac server and tried to ping the new ip address and this time it worked. I moved another switched and cleared the arp cache and had no issues so it was the clearing of the arp cache that did the trick......But thank you everyone for helping out I appreciate it!!!!!!
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.