cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
295
Views
0
Helpful
2
Replies

RE: VLAN connection - Help.

qwertys21
Level 1
Level 1

Hi All

Something strange that needs explaining. I configured an interface to a particular vlan 10 and it does not work but i change the vlan and it works.

I change the blade, the switch and still the same issue. As long as I put it in vlan 10, it will not work but put it in vlan 11 or 12 or any other vlan, it will work. What can be going wrong?

There are devices working in all the vlans.

"This is the show run"

interface GigabitEthernet?/?

no ip address

logging event link-status

switchport

switchport access vlan 10

switchport mode access

rmon collection stats

spanning-tree portfast

spanning-tree bpduguard enable

Thanks

2 Replies 2

garytayl
Level 3
Level 3

Quick question. Do you have vlan 10 listed under show vlan? If not, go ahead and create it and test again

Thanks. I think the network was just being quirky. I came in the next day and all was fine. Strange. Thanks for your help. REally appreciate it. Cheers

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: