Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Recovering from VTP updates

Is there a way to recover from a switch being brought online inadvertently, which was configured as vtp server with a higher revision number, and incorrect vlan configurations? The switch updated the existing online switches.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Recovering from VTP updates

Sadly - no.

You need to remove the offending switch, then re-update the proper VTP server.

HTH>

3 REPLIES

Re: Recovering from VTP updates

Sadly - no.

You need to remove the offending switch, then re-update the proper VTP server.

HTH>

New Member

Re: Recovering from VTP updates

Thanks, that's what I suspected would need to be done.

Purple

Re: Recovering from VTP updates

Do you have a backup config from your normal vtp servers ? You would also have to have a backup of your vlan.dat files from the servers to recover . Otherwise its probably a manual recovery on your main vtp servers once you pull off the offending switch that made the change or change it to transparent and back.

117
Views
0
Helpful
3
Replies