Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Red Status Light on the 4506

I tried searching the archives and google but couldn't find what this means anyone point me in the right direction? Thanks. Basically, the status light on the 4506 is red and no one connected to that switch has connectivity, i tried consoling in but it seems frozen even after reboot, does this mean the sup is gone?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Red Status Light on the 4506

Hi,

Look at Using LEDs to Identify Startup Problems

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/05trblsh.html#wp1015099

If the problem persists Contacting the Cisco Technical Assistance Center

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/05trblsh.html#wp1018250

I hope this helps.

Best regards.

Massimiliano.

4 REPLIES

Re: Red Status Light on the 4506

Yes !!!...Mostly SUP is gone, if you are not getting the console access also....

Try removing the SUP & resinserting again and see if it comes online.

HTH..

Re: Red Status Light on the 4506

Hi,

Look at Using LEDs to Identify Startup Problems

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/05trblsh.html#wp1015099

If the problem persists Contacting the Cisco Technical Assistance Center

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/05trblsh.html#wp1018250

I hope this helps.

Best regards.

Massimiliano.

Re: Red Status Light on the 4506

Vinh,

It looks like you will need to RMA the supervisor in your switch. For your reference here is a guide to what the LED's mean.

http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/installation/guide/78-14409-08/05trblsh.html#wp1024760

HTH,

Mark

Community Member

Re: Red Status Light on the 4506

thanks a lot guys, it's the info i'm looking for!

Vin

823
Views
10
Helpful
4
Replies
CreatePlease to create content