as of now i have some servers of Branch 2 that need to be placed physically in the Branch1 for some application testing but same time needs access from Branch 2 also. These servers are in the 192.168.64.0 255.255.192.0 subnet (IP 192.168.100.10, 11,12). so i want to redistribute these few servers 192.168.100.10,11 & 12 in to the ospf route along with the 192.168.0.0 255.255.192.0 network of Branch 1.
At Branch 2 i will have a static route 192.168.64.0 255.255.192.0 this i will redistribute to the ospf using redi stat subnet coomand.
so 192.168.64.0 255.255.192.0 from branch 2 and 192.168.100.x/32 from branch 1 router, my concern is will it create any issue in the ospf routing? will it take the specifi route and route to Branch 1 for these few servers?
Thanks for the quick update. Yes i have updated the same to the server team regarding thei concern. But there are some application installed on this, they are not sure whether it has some dependany over the IP or not. I am waiting for their update also. I was lookig for any work around in this. If no or hard i have to force them to move it to the site2 physically and have the test there
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.