cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
562
Views
0
Helpful
3
Replies

redistribution

carl_townshend
Spotlight
Spotlight

Hi all, If I wanted to redistribute eigrp 100 into 200 and vice versa, Do I need to set any metrics ?

3 Replies 3

Jon Marshall
Hall of Fame
Hall of Fame

Hi Carl

You don't need to set metrics if you are redistributing between eigrp processes. You set metrics when the routing protocols you are redistributing between use different metrics eg RIP - hop count, OSPF - cost etc.

HTH

Jon

Thanks, So when I redistribute one in to the other, Will they both know about all routes in each others AS ?

Hi Carl

Yes they will if you redistribute both ways. You need to be careful when doing mutual redistribution between routing protocols.

Here's a link covering routing protocol redistribution. Have a look at example 3 in the Problems section which cover redistributing between EIGRP processes.

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml

HTH

Jon

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: