Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

redistribution

Hi all, If I wanted to redistribute eigrp 100 into 200 and vice versa, Do I need to set any metrics ?

3 REPLIES
Hall of Fame Super Blue

Re: redistribution

Hi Carl

You don't need to set metrics if you are redistributing between eigrp processes. You set metrics when the routing protocols you are redistributing between use different metrics eg RIP - hop count, OSPF - cost etc.

HTH

Jon

New Member

Re: redistribution

Thanks, So when I redistribute one in to the other, Will they both know about all routes in each others AS ?

Hall of Fame Super Blue

Re: redistribution

Hi Carl

Yes they will if you redistribute both ways. You need to be careful when doing mutual redistribution between routing protocols.

Here's a link covering routing protocol redistribution. Have a look at example 3 in the Problems section which cover redistributing between EIGRP processes.

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009487e.shtml

HTH

Jon

367
Views
0
Helpful
3
Replies