I'm running hybrid mode on sup720s and couple weeks ago active sup failed over to standby sup with no apparent reason and when I do show redundacny it says cause of switchover "unsupported" anyone know what that means? I'm running 8.5.2 in cat os and 12.2(18)SXF4 on the MSFC.
Are you sure that you have the same IOS version/feature set on both of the RP's on both of your 720's? One of the few requirements to run SSO is Identical hardware, and software on both supervisors. Do you have any log messages when the switchover occurred?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...