Stack the switches and virtually, both the switches will look like a single chassis ! you will manage the switches with one ip address and have the vlan definitions common to both the switches. Have a look at this URL:
Stacking the 3750's will provide you with a single switch block. This doesn't necesarily constitute redundancy from your host's perspective if your host is connected to only one of these switches.
Redundancy is achieved by connecting each host interface to ports on separate switches within the stack. You can then "bond" your ports together on the Linux side, and create an etherchannel on the switch side. You can use LACP to negotiate the etherchannel with ports connected to different switches on the 3750.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.