Ok so I have three locations. Each one has an Internet connection (50Mbs) each to the same provider. Each location also has a connection to an MPLS provider that routes our interoffic traffic. I would like to config my network to reroute Internet bound traffic over my MPLS network in the event one of the three locations looses it Internet connectivity thus leveraging our MPLS network. The wrench in the works is the ASA. It is clouding my perseption of the way to do this:
| LA LAN-->3750-->ASA-->2911-->Internet
So each office has the same set up of hardware. The LAN users all connect to the 3750 the 3750 connects out to the MPLS provider for interoffice traffic and to the ASA for Internet traffic which intern connects to the 2911 WAN router. The trick is to figure out how to tell the 3750 that the connection out to the Internet is dead and route all traffic over the MPLS network which I should then be able to route out to one of the offices with a working Internet feed. Right now the network is completely statically routed. Any suggestions on where to start?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...