Hi, I am having a redundant design upgrade request from the client.
Here is the scenario, location A is the servers room, location B is a remote site. There is a 3560 switch at location A and location B and they are connected to ISP WAN at this moment. ISP does the routing and switching.
I need to build a direct connected microwave data link between location A and B as a redundant link. Please check the diagram
On the switch at location B, Gi0/1 is connected to ISP router. Fa0/47 is connected to microwave data link switch. I need to adjust the configuration of the switch such that if the G0/1 interface on the VTS switch is lost then it will pass data from port 47. In this case, how do I change my configure?
Thanks,
Dennis
