11-08-2011 03:01 AM - edited 03-07-2019 03:16 AM
I have an 4507R with one Supervisor Engin V card. I want to add a redundant supervisor engin card to my 4507R Chassis.
Can i use supervisor engin 6-E for redundant or i must use Supervisor Engin V ?
Witch model of Supervisor Engines Supported with this chasis?
Solved! Go to Solution.
11-08-2011 04:54 AM
Ali,
You need to have the same exact sup modules and IOS in the chassis, if not, SSO will not work.
HTH
11-08-2011 05:41 AM
Hi,
As above said, you need to have same supervisor engines and same ios versions on both.
4507 will support both V and 6-E but when you need to keep two supervisor enginers then you must have same type/model of both.
See the below link for more information:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/prod_white_paper0900aecd806ed38a.html
Please rate the helpfull posts.
Regards,
Naidu.
11-08-2011 04:54 AM
Ali,
You need to have the same exact sup modules and IOS in the chassis, if not, SSO will not work.
HTH
11-08-2011 05:41 AM
Hi,
As above said, you need to have same supervisor engines and same ios versions on both.
4507 will support both V and 6-E but when you need to keep two supervisor enginers then you must have same type/model of both.
See the below link for more information:
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/prod_white_paper0900aecd806ed38a.html
Please rate the helpfull posts.
Regards,
Naidu.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: