Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Reg:cisco 3500

Dear sir,

iam having one 3500 l3 switch and 3 2950t l2 switches now iwant l3 switch as core switch and l2 switch as slave switch and i want create vlans departmentwise we have 4 departments

1)accounts

2)marketing

3)technical

4)admin

now iwnat to create a vlans to these departments all r accessible to each other.plz help me how can configure vlans on L3 switch and what is the slave config.plz help me.

srinivas.D

9246571397

1 REPLY
Silver

Re: Reg:cisco 3500

Hi Srinivas ,

Craete follwoing vlan's on 3500 switch.

Int vlan 2

descripton ** Accounts - vlan**

ip address 192.168.1.2 255.255.255.0

int vlan 3

descritpion **marketing **

ip address 10.10.10.1 255.255.255.0

int vlan 4

descritpion **technical**

ip address 10.20.10.1 255.255.255.0

int vlan 5

descritpion **admin**

ip address 10.30.10.1 255.255.255.0

int f0/1

description UPlink to 1'st L1 switch**

switchport trunk encapsulation dot1q

int f0/2

description UPlink to 1'st L2 switch**

switchport trunk encapsulation dot1q

int f0/3

description UPlink to 1'st L3 switch**

switchport trunk encapsulation dot1q

where you want to connect three L1's..

suppose if you want to place L1 switches for connecting different departments then .

1'st L1 config :

int f0/47

des ** uplink to 3550 **

switchport trunk encapsulation dot1q

int vlan2

ip address 192.168.1.3 255.255.255.0

ip deafult-gateway 192.168.1.2

2'nd L1 config:

int vlan 3

descritpion **marketing **

ip address 10.10.10.2 255.255.255.0

int f0/47

des ** uplink to 3550 **

switchport trunk encapsulation dot1q

ip deafult-gateway 10.10.10.1

3'rd L1 config:

int vlan 4

descritpion **technical**

ip address 10.20.10.2 255.255.255.0

int f0/47

des ** uplink to 3550 **

switchport trunk encapsulation dot1q

ip deafult-gateway 10.20.10.1

pl refer the below link.

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml#config2

Thanks,

Satish

118
Views
5
Helpful
1
Replies
CreatePlease to create content