Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Reg:Network Moniter

Hi Team,

In my company,We have installed OP Manager in our server.here we have c3750 switch,how I configure SNMP trap for moniter the cisco device cpu,memory and bandwidth utilization.

Kindly help to moniter my device.

 

Thanks and Regards,

Mohamed kabeer.S

1 REPLY

Hi Mohamed , use below link

Hi Mohamed ,

 use below link for configurations support . which version of SNMP you are running on your OP Manager 

Table 33-1 SNMP Security Models and Levels 

Model
Level
Authentication
Encryption
Result

SNMPv1

noAuthNoPriv

Community string

No

Uses a community string match for authentication.

SNMPv2C

noAuthNoPriv

Community string

No

Uses a community string match for authentication.

SNMPv3

noAuthNoPriv

Username

No

Uses a username match for authentication.

SNMPv3

authNoPriv

Message Digest 5 (MD5) or Secure Hash Algorithm (SHA)

No

Provides authentication based on the HMAC-MD5 or HMAC-SHA algorithms.

SNMPv3

authPriv
(requires the cryptographic software image)

MD5 or SHA

Data Encryption Standard (DES) or Advanced Encryption Standard (AES)

Provides authentication based on the HMAC-MD5 or HMAC-SHA algorithms. Allows specifying the User-based Security Model (USM) with these encryption algorithms:

DES 56-bit encryption in addition to authentication based on the CBC-DES (DES-56) standard.

3DES 168-bit encryption

AES 128-bit, 192-bit, or 256-bit encryption

 

 

You must configure the SNMP agent to use the SNMP version supported by the management station. Because an agent can communicate with multiple managers, you can configure the software to support communications using SNMPv1, SNMPv2C, or SNMPv3.

 

Let me know  , if you are looking for any support on this .

 

HTH

Sandy

35
Views
0
Helpful
1
Replies
CreatePlease to create content