Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Reg:

Dear sir,

My customer is having 2 isps one is from B.T(british telecom)&Primus

he wants to terminate these 2 isps in one router and he wants isp failover.

and primus he was having 2mbps out of this 2mb he want to segrigate 1 mb

for data and 1 mb for voice and he want loadbalancing also.

Regards

srinivas

1 REPLY
Silver

Re: Reg:

Hi srinivas,

for the first issue, you have to put your voice traffic in priority queue. You could use something like this:

class-map match-any VOIP

match ip dscp 40 (or 46, or what you want)

match ip address (voip traffic from a specific subnet, or host)

!

policy-map PRIMUS

class VOIP

priority

police 1000000 conform-action transmit exceed-action drop

class DATA

bandwith remaining percent 90

!

interface X

description ** PRIMUS **

service-policy output PRIMUS

!

Then, for ISP failover, and possibly loadbalancing (but not if you have a full BGP table, of course), please check:

http://www.cisco.com/go/oer

HTH

Andrea

114
Views
0
Helpful
1
Replies