Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Regarding PS2 fan issue in Cisco 3745 router

Dear friends,

There is Cisco 3745 router with the following output:

sh env all

Power Supply 1 is  present.

        Fan status:  normal

        Input Voltage status:  normal

        DC Output Voltage status:  normal

Power Supply 2 is  present.

        Fan status:  Warning - failure

        Input Voltage status:  normal

        DC Output Voltage status:  normal

48V Power Supply 3 is not present.

48V Power Supply 4 is not present.

Board Temperature: normal.

wcmcq-dial#sh power inline

PowerSupply   SlotNum.   Maximum   Allocated       Status

-----------   --------   -------   ---------       ------

INT-PS          0         0.000     0.000         PS1 ABSENT PS2 ABSENT

Earlier we were even getting fan rotation syslog messages. However, after they have disappeared but the fan isn't spinning still?

Is it advisable to replace PS2?

Thanks a lot

Gautam

3 REPLIES
VIP Super Bronze

Re: Regarding PS2 fan issue in Cisco 3745 router

Hi Gautam,

Yes, PS2 apear to be out.  RMA it.

Reza

Regarding PS2 fan issue in Cisco 3745 router

Hi gautamzone,

Please let me know if the change of PS2 solve your problem.

I'm with the same problem on C3745.

Thank you!

Hall of Fame Super Gold

Re: Regarding PS2 fan issue in Cisco 3745 router

RMA your faulty fan can fix it.

Sent from Cisco Technical Support Nintendo App

1483
Views
0
Helpful
3
Replies
CreatePlease to create content