Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

%Reload in Progress

I have a Catalyst 4500 WS-C4506 and

WS-X4516-10GE Supervisor running under

IOS 12.2(52)SG IP BASE SSH. After having

installed IOS 12,2(53)SG i wanted to schedule a reload. After entering the reload at command I get the message %Reload in Progress and nothing happens.

Any ideas thanks

4 REPLIES
Hall of Fame Super Silver

Re: %Reload in Progress

hello Manfred,

if you use reload at it expects a time

see

reload at ?

hh:mm Time to reload (hh:mm)

if you want to reload immediately just type

reload

Hope to help

Giuseppe

New Member

Re: %Reload in Progress

Hello Guiseppe,

i used the full reload command, i.e.

reload at 04:00 14 Oct IOS-Upgrade

but the reload is not scheduled instead I get the error message %Reload in Progress

Greetings

M.

Bronze

Re: %Reload in Progress

Hi Manfred.

What does the output of show reload look like?

Could you try a reload cancel before you then try to do the reload?

It might be a bug in the IOS - have you checked the bug toolkit?

HTH, Ingolf

New Member

%Reload in Progress

Hi Manfred, did you get to the bottom of this '%reload in progress' issue?  I'm experiencing the same problem and it appears it's related to the aaa config as the problem doesn't occur if I remove the aaa config before attempting the reload. 

Craig

1216
Views
0
Helpful
4
Replies
CreatePlease to create content