I have a 3550 < IPBASEK9-M > running version 12.2<40>SE software.
There is a VTP domain name setup on the switch.
I am using the Transparant mode on the switch.
I also have created an extended vlan.
How do I remove the VTP domain name. I do not want a name configured on the switch.
Thanks for your help,
The default domain is null in vtp mode,Note once you've changed a switch's VTP domain to something other than null,there is no way to change it back to null short of erasing the configuration and rebooting.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...