Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

REP ring using microwave links disconnecting

Good morning,

We have an Ethernet ring using an IE3010 and 4 x IE3000 switches configured with REP.

All the links are microwave radio connections.

Two of the switches lose connectivity and report the following error:

"005563: May 10 00:37:20.898: %REP-4-LINKSTATUS: GigabitEthernet1/2 (segment 1) is non-operational due to neighbor not responding

005564: May 10 00:37:24.379: %REP-4-LINKSTATUS: GigabitEthernet1/2 (segment 1) is operational"

The RF links seems to be stable.

I am wondering if anyone has experience with REP on microwave links or know what can be causing this flapping?

Thank you

Pieter

Everyone's tags (1)
403
Views
0
Helpful
0
Replies
CreatePlease to create content