I am going to replace a supervisor Engine 1A with a Supervisor Engine 720 3B. I meet all the Prerequisites for adding the 720 3B to the 6509 chassis. Question: Can I install the Supervisor Engine 720 3B in slot 5 or 6 of a 9 slot chassis and configure it while still leaving the Sup A1 in slot 1 as primary?
I can't say for sure but I would doubt it . I have never heard of being able to do that . The 720 is native ios and the sup1a I believe was hybrid mode . You would have to have a redundant 720 in slot 6 as backup . The sup1a and the 720 run 2 totally different codes .
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...