05-12-2009 06:03 PM - edited 03-06-2019 05:41 AM
I need to copy a new IOS file to my switches and have a problem with TFTP (various issues) and serial x-fer and need a new way to accomplish this task.
Does anyone have a different procedure beside TFTP or serial x-fer and could provide enough detail to make it useful?
Tks
Frank
05-12-2009 06:15 PM
What kind of switches?
05-12-2009 06:35 PM
Cisco
3750
3750E
6509E
Tks
05-12-2009 06:53 PM
6509 via the flash card
3750 via FTP
05-13-2009 08:33 AM
YES, but how do you get the IOS file onto the flash media in the first place?
Should I buy a multi-media card reader?
Is this the only option?
Tks
Frank
05-13-2009 11:10 AM
What sup are you using for this switch? Does it have a PCMCIA or Compact flash slot? Either way you'll probably need that reader. One other question. Does the sup have USB ports?
05-13-2009 11:35 AM
Hey Pompey,
I am using Sup720-10G sups with USB ports. I am running IOS s72033-adventerprisek9-mz.122-33.SXI.bin.
There are newly discovered bugs in this version and I will upgrage to the next release to address these bugs.
Are the USB ports usable in with the hardware/software I already have?
Any clues??
Tks
Frank
05-13-2009 12:14 PM
I don't have that sup on my network to check the functionality of the USB ports. If you get a compact flash reader/writer you should be good to go.
05-12-2009 06:22 PM
Have you tried to HTML into the switch and upgrade that way?
05-13-2009 08:36 AM
THANKS,
I will try this method today and reply back with results!!!!
Thanks again guys!
Frank
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: