Restart SNMP on CatOS

[sometechguy]

Is there any way to restart all SNMP processes on a Cat6000 switch?

I have tried "set snmp disable" then "set snmp enable" but it is not resolving my problem.

I am trying to pull SNMP info using a port map utility and it always hangs up on one, specific CatOS switch.

[ariela]

Please give me a "show snmp"

Thanks

Andrea

[sometechguy]

SNMP: Enabled

RMON: Disabled

Extended RMON Netflow Enabled : None.

Memory usage limit for new RMON entries: 85 percent

EngineId: 00:00:00:09:00:d0:97:f1:6c:00:00:00

Chassis Alias:

Traps Enabled: None

Port Traps Enabled: None

Community-Access Community-String

---------------- --------------------

read-only removed

read-write removed

read-write-all removed

Additional- Access-

Community-String Access-Type Number View

-------------------- -------------- ------- -----------------------------------

Trap-Rec-Address Trap-Rec-Community Trap-Rec-Port Trap-Rec-Owner Trap-Rec-Index

---------------- ------------------ ------------- -------------- --------------

[ariela]

Have you already tried "set snmp trap enable all"?

All traps are disabled by default and need to be added to the configuration, either individually or by with the all parameter.

Then check with 'test snmp'

HTH

Andrea