Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Restore CISCO881-SEC-K9 factory startup config

I messed up  the IOS on the flash of CISCO881-SEC-K9. On reboot it booted to ROMMON which allowed me to tftp up a working IOS c880data-universalk9-mz.151-4.M3.bin. Unfortunately somewhere in my playing around the default startup configuration factory loaded on the routerhas been erased. I can load a new a config on the device but as I'm using the router to learn its helpful to have the original config load when I factory reset the device. Can anyone post the factory start up config?

Also I list of the files in the flash: directory for factory would be helpful to

thanks

SW       

Everyone's tags (5)
3 REPLIES
Hall of Fame Super Gold

Restore CISCO881-SEC-K9 factory startup config

A quick search would have shown to you: 'write erase' and reload.

However there is nothing to learn from the default configuration, beside the fact that it doesn't do anything.

New Member

Restore CISCO881-SEC-K9 factory startup config

Paolo thanks for your insight but if it was that simple I wouldn't have posted. I've tried a write erase and the reset button on the back off the router but it doesn't restore the config as shipped from the factory, which is why I asked if some one could posted it. Also I requested a list of the files is ships with in Flash.

Hall of Fame Super Gold

Restore CISCO881-SEC-K9 factory startup config

Also I requested a list of the files is ships with in Flash.

The only important thing you need is the IOS.  The rest are only for SDM.

1034
Views
0
Helpful
3
Replies