Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Restore erased flash in 2950

I have catalyst 2950 with erased flash and nvram. So I can't boot it. I found on cisco.com following files:

1) C2950 EI AND SI IOS CRYPTO IMAGE

2) C2950 EI AND SI IOS CRYPTO AND WEB BASED DEVICE MANAGER

3) C2950 EI AND SI IOS IMAGE

4) C2950 EI AND SI IOS IMAGE AND WEB

BASED DEVICE MANAGER

What I can upload to switch and how?

  • LAN Switching and Routing
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: Restore erased flash in 2950

Without a running IOS on the system, you need to use Xmodem, see instructions here: http://www.cisco.com/warp/public/473/192.html

As for the image you need to select, you need to choose what you need. Each image provides a variety of services. For list of services, go to http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

HTH,

__

Edison.

3 REPLIES
Hall of Fame Super Bronze

Re: Restore erased flash in 2950

Without a running IOS on the system, you need to use Xmodem, see instructions here: http://www.cisco.com/warp/public/473/192.html

As for the image you need to select, you need to choose what you need. Each image provides a variety of services. For list of services, go to http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp

HTH,

__

Edison.

Hall of Fame Super Blue

Re: Restore erased flash in 2950

Edison

Sorry about this but i can never find those docs that show how the port groupings are setup on 6500 modules. If you have a moment can you have a look at this thread and if you have the doc could you post it up.

Wouldn't mind a copy of the link myself as well :-)

http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Network%20Infrastructure&topic=LAN%2C%20Switching%20and%20Routing&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.2cbff39f

Thanks

Jon

New Member

Re: Restore erased flash in 2950

thanks!

1132
Views
0
Helpful
3
Replies