Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Restrict SNMP on Nexus 5548

Hi,

I have some 5548UP with the L3 card. I will use them as the local gateway for my servers, so I need some public addresses on them.

I configured OSPF and BGP without any problems.

When I nmap the public Loopback from another network I see that the SNMP port is open to all IPs. My SNMP config is :

ip access-list ADMIN

  10 permit ip 10.1.0.0/16 10.1.0.0/16

  100 deny ip any any

snmp-server community public group network-operator

snmp-server community public use-acl ADMIN

How can I avoid the port to appear open ?

It seems that the correct way to do this is using COPP, but on Nexus 5k you cant define your own classes.

Thanks !

Everyone's tags (2)
192
Views
0
Helpful
0
Replies
CreatePlease login to create content