Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Reuse GBIC

Dear Sir,

I have GBIC for WS-X6416-GBIC (on 6506) and now I am replacing the 6506 with 4506E. WS-X4418-GB will be used this time.

Can I use the old GBIC on WS-X6416-GBIC?

Thanks

1 REPLY
Hall of Fame Super Blue

Re: Reuse GBIC

Hi Joseph

You don't say which GBIC it is.

The WS-X4418-GB supports the following GBIC's

WS-G5484, G5486, G5487

The WS-X6416-GBIC supports

WS-G5483, WS-G5484, G5486, G5487

The WS-G5483 is a for Cat5 so unless you are using that in your 6416 module you should be fine.

Attached is the full matrix for GBIC compatability between Catalyst switches.

http://www.cisco.com/en/US/docs/interfaces_modules/transceiver_modules/compatibility/matrix/OL_6981.html

HTH

Jon

115
Views
5
Helpful
1
Replies
CreatePlease to create content