Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

ROMMON in sup720-3B

I have got to upgrade the IOS on catalyst 6500E, which has got 2 SUP720-3B. One of the SUP720 was working fine with the upgraded software where as the other SUP720 was booting up only in the ROMMON mode. I did access the non-working SUP720 by using (from working SUP720)the command "remote login switch" . The prompt was router-sp#.

router-sp# reload

command was issued after both the SUP720's are in the ROMMON mode and none of them are booting up the file.

I have attached the error in the file.

Any help is appreciated!

2 REPLIES
Anonymous
N/A

Re: ROMMON in sup720-3B

Cisco Employee

Re: ROMMON in sup720-3B

I am suspecting there to be a typo in the file name specified in boot statement or the image to be missing. Can you issue "dir bootflash:" and "dir disk0:" and if there are any valid files you see, try issuing a manual boot(for example boot disk0:s72033-ipxxxx

244
Views
0
Helpful
2
Replies
CreatePlease to create content