Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

ROMMON Upgrade

I am in the process of upgrading the Switch CatOS to an SSH version and it says " Requires ROMMON version 5.4(1) or later".

Where do I get this from?

I have seen this in the software download for the Cat 4000

Release 6.1(5)

Description Cat4000 Rommon Upgrade

Size 2070224

BSD Checksum 06325

Router Checksum 0xef00

MD5 16247f37cce058f5102bf09756a714b3

Date Published: 08-APR-2003

Is this all I will need?

Where can I get upgrade procedure?

Thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: ROMMON Upgrade

I was able to find the cat4k rommon upgrade procedure for you on CCO. At the beginning of the document, there's a warning that if you do it improperly the system will become unbootable and RMA would be your only choice. Hence, be careful with the procedure. Here's the link.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_field_notice09186a0080094ca4.shtml

Good Luck!!

HTH

Sundar

Community Member

Re: ROMMON Upgrade

2 REPLIES

Re: ROMMON Upgrade

I was able to find the cat4k rommon upgrade procedure for you on CCO. At the beginning of the document, there's a warning that if you do it improperly the system will become unbootable and RMA would be your only choice. Hence, be careful with the procedure. Here's the link.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_field_notice09186a0080094ca4.shtml

Good Luck!!

HTH

Sundar

Community Member

Re: ROMMON Upgrade

530
Views
0
Helpful
2
Replies
CreatePlease to create content