01-28-2014 08:03 AM - edited 03-07-2019 05:51 PM
Hi,
We are plan to implement this kind of setup
Switch 1 --- connected with core switch 1
||
Switch 2
||
Switch 3
||
Switch 4
||
Switch 5 --- Connected with Core switch 2
Nornallay, we used to put root-guard on core side & loop guard on Access Side
But for the above case, what config needs to be put in between trunk of Switch2-Switch3 like that
Br/Subhojit
01-28-2014 08:08 AM
Can I ask why you are daisy chaining the switches like that?
Are the core switches VSS or using a First Hop Routing Protocol?
01-28-2014 08:11 AM
Hi,
Due to less no of uplink port availability on Core switch side
Br/Subhojit
01-28-2014 08:12 AM
Hi,
This are normal L2 switches only
Br/Subhojit
01-28-2014 08:32 AM
I think loopgaurd should be sufficient, as you will have rootgaurd configured on trunk interfaces of SW1 and SW5 going to Core1 and Core2 respectively.
Thanks
Ankur
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide