Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Route based on protocol

Hi,

I think this is probably fairly straight forward but I can't find any example configs.

I'm looking to set my cisco 877 router to pass all http & FTP traffic onto another bradband router to reduce the loading on this broadband line. Is this easy to do? If so could someone give me some pointers?

Cheers,

Al

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Route based on protocol

Al

What you describe is fairly easy to do using the feature of Policy Based Routing. This link has information about how to configure PBR and should help you to get started with it:

http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfpbr.html

HTH

Rick

3 REPLIES
Hall of Fame Super Silver

Re: Route based on protocol

Al

What you describe is fairly easy to do using the feature of Policy Based Routing. This link has information about how to configure PBR and should help you to get started with it:

http://www.cisco.com/en/US/docs/ios/12_2/qos/configuration/guide/qcfpbr.html

HTH

Rick

New Member

Re: Route based on protocol

Yep that did it - cheers.

Hall of Fame Super Silver

Re: Route based on protocol

Al

I am glad that you got it to work and that my suggestion was helpful. Thank you for using the rating system to indicate that your issue was resolved (and thanks for the rating). It makes the forum more useful when people can read about an issue and can know what successfully resolved the issue.

The forum is an excellent place to learn about Cisco networking. I encourage you to continue your participation in the forum.

HTH

Rick

184
Views
0
Helpful
3
Replies
CreatePlease login to create content