Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route Casue y Router Rebooted?

Hello Expert,

The router rebooted by itself or reloaded. How to find the route cause why it got rebooted.

 

Thanks,

 

 

XXXXXXX#  sh version
Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(1c), RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 25-Oct-05 17:10 by evmiller

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

XXXXXXX uptime is 2 days, 22 hours, 5 minutes
System returned to ROM by power-on
System restarted at 10:52:58 EST Fri Mar 7 2014
System image file is "flash:c1841-ipbase-mz.124-1c.bin"

Cisco 1841 (revision 7.0) with 97280K/33792K bytes of memory.
Processor board ID FTX1206W03B
2 FastEthernet interfaces
1 Serial interface
WIC T1-DSU
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
31808K bytes of ATA CompactFlash (Read/Write)

2 REPLIES
New Member

I have attached Tech-Support

I have attached Tech-Support output

Silver

Hi,  There is no crash file

Hi,

 

 There is no crash file on the logs, only thing is on the show version command the output shows System returned to ROM by power-on, that said you can infer that the router was either power-cycled, or that the power source went down for a few seconds. Verify your power source and troubleshoot the outlet circuit (power to router). See the link below:

http://www.cisco.com/c/en/us/support/docs/ios-nx-os-software/ios-software-releases-121-mainline/7957-crashes-lesscommon.html#power

 

Hope this helps.

52
Views
0
Helpful
2
Replies