Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route map match statement

i have two interfaces :

interface Gi3/4

ip address 10.10.10.14 255.255.255.0

interface tunnel 1

ip address 172.18.36.2 255.255.255.0

i want to use the route map to take all the traffic incoming on Gi3/4 & redirect that traffic to the interface tunnel

route-map test permit 10

match interface Gi3/4

is the command "match" above will match all incoming traffic on Gi3/4 or there is another solution?

1 REPLY
Hall of Fame Super Blue

Re: Route map match statement

Hi

access-list 101 permit ip any any

route-map REDIR permit 10

match ip address 101

set interface tunnel1

int gi3/4

ip policy route-map REDIR

HTH

Jon

277
Views
0
Helpful
1
Replies