Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

route not propagting from OSPF to eigrp

I have Netscreen Firewall connected to a Cisco 1700 router in OSPF area 2. I also have eigrp on the same 1700 to share routes with it's eigrp neigbour Cisco 6500. I can see my eigrp neighbour Cisco 6500, i can also see OSPF routes learned by the Cisco 1700 but for some reason the routes learned from OSPF are not propagating to EIGRP. I have attached the config and any help will be really appreciated.

2 REPLIES
Cisco Employee

Re: route not propagting from OSPF to eigrp

Hi Osman,

Try redistribute OSPF into EIGRP with metric set. By default, the metric while redistributing will be zero. So you may need the below command to get it work.

router eigrp 100

redistribute ospf 2 metric 100000 1 255 10 1500

Regards,

Nagendra

New Member

Re: route not propagting from OSPF to eigrp

Thanks Nagendra. That did the trick. I just had to bump up the metric higher.

Osman

119
Views
0
Helpful
2
Replies
CreatePlease login to create content