Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Route Traffic based on source to different NATs

Is it possible to route NAT traffic to different Servers on the internal Netowrk based on the source IP on the external(internet) side.

I want to route traffic from different source countrys IPs (which I hace the ACL for) to different internal Web servers.

1 REPLY

Re: Route Traffic based on source to different NATs

Hi Jim

Policy routing or policy nat should help you do this. You will be able to do destination NAT based on the source address by attaching a route-map to your nat statement.

Or you could you the policy routing to set the next hop based on source address if the servers live in different subnets.

Or a combination of the 2.

Here is a link for policy routing

hxxp://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481d.shtml

Let me know if you need any more help.

103
Views
0
Helpful
1
Replies