I'm looking to implement the routed access model on my network i.e. L3 between core & dist and L3 between dist & access too. Only L2 would be each individual access switch and the ports it connects to user workstations. The access switch would route locally for all users connected to it and have a L3 point-to-point link to the distribution 4500
Now, the problem is I have IPX on my network and buying 3750's for the access. 3750's don't support IPX routing. Is there a way I simply route IP on the access while send IPX traffic to the distribution 4500's to route it on them?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...