Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Router 1941 HWIC issue

My router 1941 have a HWIC serial card & it is continuously rebooting and generating the below logs.

What can be possible issue.to test the card i insert the same card in router different slot but still the same error is generating.

000031: Nov 28 16:40:43.104 GMT: %LINK-3-UPDOWN: Interface Serial0/1/0, changed state to up

000032: Nov 28 16:40:44.104 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000033: Nov 28 16:41:05.020 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000034: Nov 28 16:41:15.020 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

--More--                           000035: Nov 28 16:41:30.000 GMT: %SYS-5-CONFIG_I: Configured from console by ccbadmin on console

000036: Nov 28 16:41:35.040 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000037: Nov 28 16:41:45.029 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000038: Nov 28 16:42:05.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000039: Nov 28 16:42:15.029 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000040: Nov 28 16:42:35.029 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000041: Nov 28 16:42:45.029 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000042: Nov 28 16:42:45.953 GMT: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up

000043: Nov 28 16:42:46.953 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

000044: Nov 28 16:43:05.029 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000045: Nov 28 16:43:15.029 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000046: Nov 28 16:43:35.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

--More--                           000047: Nov 28 16:43:45.030 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000048: Nov 28 16:44:05.034 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000049: Nov 28 16:44:15.030 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000050: Nov 28 16:44:35.030 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000051: Nov 28 16:44:39.134 GMT: %LINK-3-UPDOWN: Interface Serial0/1/0, changed state to down

000052: Nov 28 16:44:42.034 GMT: %LINK-3-UPDOWN: Interface Serial0/1/0, changed state to up

000053: Nov 28 16:44:43.034 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000054: Nov 28 16:45:05.030 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000055: Nov 28 16:45:15.030 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000056: Nov 28 16:45:35.030 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000057: Nov 28 16:45:45.031 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000058: Nov 28 16:46:05.031 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

--More--                           000059: Nov 28 16:46:15.031 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000060: Nov 28 16:46:35.031 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000061: Nov 28 16:46:45.031 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000062: Nov 28 16:47:05.035 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000063: Nov 28 16:47:15.031 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000064: Nov 28 16:47:35.035 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000065: Nov 28 16:47:45.032 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000066: Nov 28 16:48:05.032 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000067: Nov 28 16:48:15.032 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000068: Nov 28 16:48:35.036 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000069: Nov 28 16:48:45.032 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000070: Nov 28 16:49:05.032 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

--More--                           000071: Nov 28 16:49:15.032 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000072: Nov 28 16:49:35.032 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000073: Nov 28 16:49:45.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000074: Nov 28 16:50:05.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000075: Nov 28 16:50:15.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000076: Nov 28 16:50:35.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000077: Nov 28 16:50:45.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000078: Nov 28 16:51:05.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000079: Nov 28 16:51:15.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000080: Nov 28 16:51:35.033 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000081: Nov 28 16:51:45.034 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000082: Nov 28 16:52:05.038 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

--More--                           000083: Nov 28 16:52:15.034 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000084: Nov 28 16:52:35.038 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000085: Nov 28 16:52:45.034 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000086: Nov 28 16:53:05.034 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

000087: Nov 28 16:53:15.034 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up

000088: Nov 28 16:53:35.038 GMT: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to down

CCC-Manori#

Regards,

Wajid Dabir

1 REPLY
Hall of Fame Super Silver

Router 1941 HWIC issue

Trying the card in a different slot was a good test. I would suggest that the next step might be to test the card in a different router, if you have another router available.

HTH

Rick

88
Views
0
Helpful
1
Replies