Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Router 2691 and 3725 are not booting

Hi,

I can not bott from flash, If I put the flash in another router it works!

XMODEM load into the RAM:

I have tried a few images. If I try to load an image into the ram i get the following output:

rommon 2 > xmodem -r -c c3725-is-mz.122-15.T17.bin

Download Complete!

program load complete, entry point: 0x80008000, size: 0x1165c54

Self decompressing the image : #################################################

################################################################################

########################################################################## [OK]

Smart Init is disabled. IOMEM set to: 25

Using iomem percentage: 25

Restricted Rights Legend

....an so on

IOS (tm) 3700 Software (C3725-IS-M), Version 12.2(15)T17, RELEASE SOFTWARE (fc1) Compiled Sat 13-Aug-05 12:44 by kehsiao

Image text-base: 0x60008954, data-base: 0x61B20000

========= Dump bp = C000000 ======================

C000000: 3C123CCD 3C003C00 3C003C00 3CDD3CE0 3C003C00 3C003C00 3CDD3CB8 3CFF3CEC

.....->

3C003C00 3C003C00 3C003C00 3C003C0

0

========= Dump bp->next = 3C003C00 ======================

========== Dump bp->previous = 3CDD3CB8 =====================

============================================

%Software-forced reload

Unexpected exception, CPU signal 23, PC = 0x60525344

-Traceback= 60525344 60523550 6050A4F4 605063A8 60504604 604A2E94 60512A94 60598

B74 604A2B94 6043BEB0 6043C2E4 604F83F4 604F83D8

$0 : 00000000, AT : 62D50000, v0 : 62FC0000, v1 : 62FC0000

a0 : 62F942B8, a1 : 0000C100, a2 : 00000000, a3 : 62AC0000

t0 : 0000FF00, t1 : 3401FF01, t2 : 605284D0, t3 : FFFF00FF

t4 : 605284D0, t5 : 00000000, t6 : 00000000, t7 : 00000000

s0 : 00000000, s1 : 00000000, s2 : 62AB0000, s3 : 00000000

s4 : 62DD9824, s5 : 0000008C, s6 : 0C000000, s7 : 62DD9450

t8 : 6313F5D0, t9 : 00000000, k0 : 3041E801, k1 : 30410000

gp : 62D5C460, sp : 63136858, s8 : 00000021, ra : 60523550

EPC : 60525344, ErrorEPC : 020C4040, SREG : 3401FF03

MDLO : 00000000, MDHI : 00000003, BadVaddr : 1536EAED

Cause 000F0024 (Code 0x9): Breakpoint exception

=== Flushing messages () ===

*** System received a Software forced crash ***

signal= 0x17, code= 0x24, context= 0x62fc4204

PC = 0x6052a288, Cause = 0xf0020, Status Reg = 0x34018002

Any Idea?

243
Views
0
Helpful
0
Replies