Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Router 2921 ptime error/ open tac with cisco

hello all,

I have an issue in my router and according to the results that I got, I have to open a tac with cisco.

please help!!

thanks alot,

1 ACCEPTED SOLUTION

Accepted Solutions

Router 2921 ptime error/ open tac with cisco

We don't use SIP, so I don't have a ton of experience with it. You should be able to disable it if you don't have any services that rely on it.

http://en.wikipedia.org/wiki/Session_Initiation_Protocol

As far as VPN, it won't be affected, but I can't answer with authority as to your CME implementation. If you don't have SIP phones, chances are you're not using SIP. If you're not 100% sure, you should create an outage window, disable it, and then reboot a couple of phones to make sure they're still working.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
5 REPLIES

Router 2921 ptime error/ open tac with cisco

What's the actual error?

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
New Member

Router 2921 ptime error/ open tac with cisco

Hi,

%SIP-3-UNSUPPORTED:Unsupported ptime value

I decoded this and but there was no helpful information.

regards,

Router 2921 ptime error/ open tac with cisco

Do you need SIP? If not, take a look at this post:

https://supportforums.cisco.com/thread/2001302

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
New Member

Router 2921 ptime error/ open tac with cisco

Hi,

I got the solution thanx.

but what happen if I disable the SIP tcp / udp  services on my router?

already I have a CME and I have a site-to-site VPN connection. these services on my router will be affected or not?

BTW; can you provide me further information on SIP service?

regards,

Router 2921 ptime error/ open tac with cisco

We don't use SIP, so I don't have a ton of experience with it. You should be able to disable it if you don't have any services that rely on it.

http://en.wikipedia.org/wiki/Session_Initiation_Protocol

As far as VPN, it won't be affected, but I can't answer with authority as to your CME implementation. If you don't have SIP phones, chances are you're not using SIP. If you're not 100% sure, you should create an outage window, disable it, and then reboot a couple of phones to make sure they're still working.

HTH,
John

*** Please rate all useful posts ***

HTH, John *** Please rate all useful posts ***
1276
Views
10
Helpful
5
Replies
CreatePlease login to create content