End user has a new 3925 router with c3900-universalk9-mz.SPA.152-2.T1.bin. Today the router boot itself and the following reason is shown.
Router#sh ver Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(2)T1, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2012 by Cisco Systems, Inc. Compiled Wed 29-Feb-12 23:44 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M13, RELEASE SOFTWARE (fc1)
Router uptime is 13 minutes System returned to ROM by address error at PC 0x898174C, address 0x7C73462E at 15:58:13 CDT Mon Jul 15 2013 System restarted at 17:49:49 CDT Mon Jul 15 2013 System image file is "flash0:c3900-universalk9-mz.SPA.152-2.T1.bin" Last reload type: Normal Reload Last reload reason: address error at PC 0x898174C, address 0x7C73462E
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...